Project model on "Smart Signalling System For Elephant Crossing"

Introduction:- Smart Signalling System for elephant Crossing is based on Signalling System Project. In forested Area North of west Bengal Jalpaiguri, Alipurduar, etc Where a large number of elephant are died in train accident. So, It is an elephant safe from train accident project.

Equipment Used:- LDR(Light Depending Resistor), IR sensor, 4 hole steel pipe,a Railway Wagon shape wood parts, Stone, Arduino Uno( For Programming), Male and Female Wire, Power adaptor or Power Source And colour for Sketch

Main Project Body:- Here a wood part, Shaped like railway Wagon and it is coloured.

4 hole steel pipe set up four direction of wood and LDR are LED are set up on Steel pipe .at cross section. it covered full area.

An Arduino Uno, for programming to activated a diiferent variation time.

A power Adaptor for giving power to the Arduino Uno board.

Male and Female wire for arduino set up.

IR sensor for Signalling System and distance measure

Working Principle:-

1. When a elephant is crossing on railway wagon the IR sensor Sensed that there are A BIG ANIMAL is there and it is informed to Driver and Station Master.
2. If a small Elephant is entered there are present a LDR(light Depending Resistor) and it is informed to Driver and he stop the train and elephant is safe from accident
3. Here Four poles are set up in four direction and LDR set up at cross direction each other.
4. If any thief entered he covered the LDR with a Small plate and he can loot the train and we are also think about this there are a Casine is used for every LED
5. The LDR are set up a height that Size of Elephant
6. And we have lastly think power source, there denest forest, Battery is the one solution to give power source when electric is not there and Battery is charged by Solar power
7. Every 4 to 5 yrs electricians have to change the battery after 4 to 5 years

So we are developing this model for better improvement. It is work in progress.